top of page
Purity-FG-Chain-Fluid.jpg

PURITY™ FG Chain Fluid Light

Petro-Canada-Logo.jpg

PURITY™ FG Chain Fluids are food grade lubricants for use on drive and conveyor chains as well as bearings found on food processing machinery.

PURITY™ FG Chain Fluids have been formulated to strongly adhere to all surfaces, resisting any throw-off from chains, and preventing fluid drops. Their tacky nature ensures they are highly resistant to water wash-out and spray loss, keeping systems free from sludge and varnish, and resulting in reduced fluid consumption.

Developed for lubricating all types of drive and conveyor chains as well as bearings found on food processing machinery, PURITY™ FG Chain Fluids deliver long-term protection from rust and corrosion and excellent wear protection by preventing metal-to-metal contact between chains and drive sprockets. Fluids may be applied by brush or drip fed via centralized lubrication systems.

PURITY™ FG Chain Fluids perform at temperatures up to 200°C, however equipment should be re-oiled more frequently where temperatures are above 150°C.

 

Features & Benefits

  • Outstanding resistance to oxidative breakdown

    • Keeps systems free of sludge and varnish​

    • Results in longer fluid life and reduced downtime even at high temperatures and in the presence of water and acidic contamination

  • Long-term protection from rust and corrosion

    • Protects chains and metal surfaces from rusting​

  • Excellent wear protection

    • Prevents metal-to-metal contact between chains and drive sprockets​

  • Strongly adheres to all surfaces

    • Resists throw-off from chains, preventing fluid drips​

    • Highly resistant to water washout and spray loss

    • Reduces fluid consumption

Applications

PURITY FG Chain Fluids are recommended for lubricating all types of drive and conveyor chains as well as bearings found on food processing machinery. They may be applied by brush or drip feed as well as by centralized lubrication systems. PURITY FG Chain Fluids may be applied at temperatures up to 200°C / 392°F. However, at temperatures above 150°C / 302°F, equipment should be re-oiled more frequently

Food Grade Approvals

  • Fully registered for use in and around food processing areas

    • MPI New Zealand Approved

    • H1 registered by NSF

    • All fluid components comply with FDA 21 CFR 178.3570 “Lubricants with incidental food contact”

    • Certified Kosher Pareve by Star K

    • Certified Halal by IFANCA

    • Fits perfectly in HACCP (Hazard Analysis and Critical Control Point) and GMP (Good Manufacturing Practice) plans

Hero-Banner-Our-Story.jpg

Certified Petro-Canada Product

Duramach partner with Petro-Canada to supply world-class advanced lubricants, specialty fluids and greases developed from over 30 years of research and development.

 

Petro-Canada lubricants continue to perform beyond expectations in virtually every industry around the globe. 

bottom of page